- Ready to use
- Low on solvents, water based
- Coverage: Approx 50 m2
- Recommended for Indoor and Outdoor use
- Store closed, in a cool, frost free area for up to 2 years
A special product from the LITHOFIN-Range for fully vitrified porcelain and other ceramic tiles (KF). Lithofin KF Protective Impregnator is a water based nearly odourless impregnator consisting of a combination of high quality water and oil resistant components.
For initial treatment of new floors with polished and sensitive surfaces. Prevents penetration of water and oil, protects against stains and dirt, and makes maintenance easier.
This special impregnator penetrates into the micro pores of ceramic surfaces and effectively protects tiles and grout lines against staining by inhibiting the penetration of water, oil, grease and dirt. Lithofin KF Protective Impregnator does not affect the appearance of the surface while making it less sensitive and easier to maintain.
Density: approx. 1.0 g/cm³
pH-Value: approx. 5
Appearance: liquid, yellowish, clear
Odour: non specific
Flash Point: approx. 36°C (c.C.)
For all floors susceptible to staining such as in kitchens, work shops, etc. For protecting all absorbent ceramic tiles in order to facilitate maintenance. Ideally suited for treating polished porcelain tiles. Suitable for indoor and outdoor use. Please Note: not all ceramic surfaces can be or should be treated. Not suitable for glazed surfaces.
HOW TO USE:
The surface to be treated must be completely clean and dry. For best results, treat the surface in sections of approx. 15m² at a time. Shake Lithofin KF Protective Impregnator well before use. Apply undiluted with a clean cloth or a lambs wool applicator and ensure even distribution by wiping over the surface several times. After 10 to 20 minutes, completely remove any surface residues with a squeegee and then with a dry cloth. Check surface for any residues, since these cannot be removed once fully cured. On large surfaces Lithofin KF Protective Impregnator can be applied with a sprayer and then immediately distributed evenly with a sponge. Product residues can be removed with a polishing machine and an absorbent pad. Attention! immediately wipe off puddles and drips. Do not allow the product to dry on the surface. Carefully remove all residues and check against back light. prior to use. Protect glass, varnished surfaces, plastics, etc. against splashes. Application (Surface) Temperature: 10 to 25°C Drying Time: Floors can be walked on after approx. 2 hours, fully dried out after 24 to 48 hours. Coverage: up to 50m² per litre, depending on the absorbency of the surface. Please Note: splashes on wood, glass, varnished surfaces, etc. should be wiped off with a moist cloth immediately. Application tools can be cleaned with water. Always test product in an inconspicuous area.
Delivery & Returns
At TileMarket, we like to keep our prices as competitive, and honest as possible, which is why we charge carriage on all deliveries, subject to weight and location. We think this is the fairest and most reasonable option, rather than charging a flat fee. This way, we can keep our stock prices low, which you our customer can benefit from.
- Fast delivery times
- Contact prior to your delvery
- Free delivery on orders over £399
In accordance with the Selling Regulations and law, the following applies to all orders made via E-Commerce contracts. The Customer is allowed to return the Goods within seven working days for a refund; this excludes all shipping costs incurred. However if any of the following points have been breached the returns contract entered will be void
- The product box has been opened
- The products have not been fixed onto a surface
- Any visual or internal damage has been done
- If the returned Goods received by the Company are not in a sellable/as sold condition.