Product code:
LFN0011

Lithofin KF Cement Residue Remover 1 Litre

     £11.26

    Key Features

    • Acid based
    • Concentrate
    • Strong effect
    • Coverage: Appox 15-30 m2
    • Store closed, in a cool area for up to 5 years

    Product Specification

    Product Overview

    A special product from the LITHOFIN-Range for ceramics, quarry tiles and porcelain (KF). Lithofin KF Cement Residue Remover is a highly active cleaning concentrate based on a special composition of acids and supporting agents. The product is nearly odourless and does not develop any corrosive vapours.

    Especially for indoor use on ceramic surfaces such as fully vitrified tiles, quarry tiles, clay pavers, etc. Effortlessly removes cement and mortar residues, rust, lime, efflorescence and other hardened dirt layers.

    Lithofin KF Cement Residue Remover dissolves anorganic deposits such as residues of flexible grouting materials, rust and calcium deposits. The residues can then be completely removed from the surface.

    TECHNICAL:

    Density: 1.1 g/cm³ pH-Value: <1 (concentrate)
    Appearance: clear, orange
    Odour: fruity acidic
    Solubility in Water: very good
    Due to its mild odour, Lithofin KF Cement Residue Remover is particularly suitable for indoor use. For cleaning all ceramic surfaces, which need to be cleaned after laying and grouting. The original appearance of the surface is restored. Surfaces: suitable for all acid resistant ceramic wall and floor tiles, quarry tiles, porcelain, clay and brick as well as terracotta surfaces.
    HOW TO USE:
    Dilute Lithofin KF Cement Residue Remover approx. 1:4 with water depending on the stubbornness of the deposits. Apply the solution to the wet surface and spread with a mop, white pad or scrubbing brush. Redistribute several times. After 10 minutes, brush the surface and rinse the solution with a sponge or a wet and dry vac. Rinse well with clear water. In case of cement based grouting materials, the dilution rate can be adjusted to 1:15. Please Note: always test the product in an inconspicuous area prior to use. Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes. Coverage: approx. 20 to 30m² depending on the type and degree of contamination. Advice: in extremely stubborn cases, we recommend Lithofin CEMENT-AWAY - for outdoor use only.

    Delivery & Returns

    Delivery

    At TileMarket, we like to keep our prices as competitive, and honest as possible, which is why we charge carriage on all deliveries, subject to weight and location. We think this is the fairest and most reasonable option, rather than charging a flat fee. This way, we can keep our stock prices low, which you our customer can benefit from.

    • Fast delivery times
    • Contact prior to your delvery
    • Free delivery on orders over £399

    Returns

    In accordance with the Selling Regulations and law, the following applies to all orders made via E-Commerce contracts. The Customer is allowed to return the Goods within seven working days for a refund; this excludes all shipping costs incurred. However if any of the following points have been breached the returns contract entered will be void

    • The product box has been opened
    • The products have not been fixed onto a surface
    • Any visual or internal damage has been done
    • If the returned Goods received by the Company are not in a sellable/as sold condition.